low carbon steel pipe
"
경도 열교환기 코일 알루미늄 구리 탄미익 관은 묻힌 유형 내밀었습니다
Products Description TORICH Extruded Embedded Type Longitudinal Spiral/Square Heat Exchanger Coil Aluminium Copper Fin Tube for Radiators Evaporator Material C10200, C11000 Etc Size Fin Thickness: 0.1-2mm; Tube OD: 8-55mm; Length: max 12m Fin Pitch Customize Surface Copper Coated End protector Plain End / Beveled End Application For Heat Exchanger Test Tension Test, Flaring Test, Flange Test, Reverse Test, Hardness Test, Hydrostatic or Nondestructive Electric Test Quick
ASTM A519 원활한 냉간 압연 강관 원형 무거운 벽
ASTM A519 Cold Drawn Round Shape Heavy Wall Seamless Steel Tube 1. ASTM A519 Standard Scope: 1.1 This specifification covers several grades of carbon and alloy steel seamless mechanical tubing. The grades are listed in Tables 1-3. When welding is used for joining the weldable mechanical tube grades, the welding procedure shall be suitable for the grade, the condition of the components, and the intended service. 2.Product details Product Name Seamless Steel Pipe Tube Material
오디 6-127mm, WT 0.5-12mm 및 열 교환기 서비스에 대한 ISO9001 승인
Boiler Seamless Stainless Steel Tube OD 6-127mm WT 0.5-12mm ISO9001 Approval Boiler seamless stainless steel tubes in OD 6-127 mm and WT 0.5-12 mm are supplied for pressure-bearing heat-transfer service, especially boiler, superheater, condenser, and heat-exchanger tube bundles. The product range matches the typical ASTM A213 scope, which covers seamless ferritic and austenitic alloy-steel boiler, superheater, and heat-exchanger tubes, with commonly supplied sizes up to 5 in.
Astm A213 304 316 지느러미 붙은 스테인리스 강 튜빙
ASTM A213 304 316 Fin Tube Connector Fin Tube Air Cooler Finned Pipe Heat Exchanger Finned Stainless Steel Tubing Finned tubes are used in applications involving the transfer of heat from a hot fluid to a colder fluid through a tube wall. The rate at which such heat transfer can occur depends on three factors: (1) the temperature difference between the two fluids; (2) the heat transfer coefficient between each of the fluids and the tube wall; and (3) the surface area to which
롤 케이지용 DOM 스틸 튜브 ASTM DIN GB JIS API 인증
Round DOM Roll Cage Tubing Structural Steel Pipe DOM Tubing For Roll Cage 【Material】 Drawn Over Mandrel (DOM) tubing is produced by electric resistance welding of carbon-steel strip followed by cold drawing over a mandrel to remove weld flash and enhance mechanical properties. This process yields: Uniform wall thickness and concentric OD/ID. Improved yield and tensile strength compared to standard ERW tubes. Smooth OD/ID surfaces, requiring minimal machining. 【Specifications】
열교환기/콘덴서를 위한 2 인치 스테인리스 관 304 316
2 inch stainless steel tubing for Heat Exchangers / Condensers 304 316 Grade: UNS N02200, UNS N02201 Production: Cold worked, Hot worked Size range: O.D.:6-127mm W.T.:1-30mm L: according to Customer requirement TABLE 2 Chemical Requirements Chemical Compostion Composition, % Element Nicel (UNS N02200) Low-Carbon Nickel (UNS N02201) Ni,A min 99.00 99.00 Cu 0.25 0.25 Fe 0.40 0.40 Mn, max 0.35 0.35 C,max 0.15 0.02 Si,max 0.35 0.35 S,max 0.01 0.01 Delivery Conditions: Symbols
열교환기/콘덴서의 둥근 u-밴드 관을 위한 스테인리스 관
ASTM B161 Nickel Seamless Pipe and Tube Steel tubes for Heat Exchangers and Condensers Grade: UNS N02200, UNS N02201 Production: Cold worked, Hot worked Size range: O.D.:6-127mm W.T.:1-30mm L: according to Customer requirement TABLE 2 Chemical Requirements Chemical Compostion Composition, % Element Nicel (UNS N02200) Low-Carbon Nickel (UNS N02201) Ni,A min 99.00 99.00 Cu 0.25 0.25 Fe 0.40 0.40 Mn, max 0.35 0.35 C,max 0.15 0.02 Si,max 0.35 0.35 S,max 0.01 0.01 Applications:
벽 냉장고 Bundy 단 하나 JASO M101에 의하여 용접되는 강철 관
JASO M101 Nylon12 Coating Single Wall Bundy Tube 1. Standard SAE J526 Welded low-carbon tubing EN10305-6 Welded cold drawn tubes from hydraulic and pneumatic power systems ASTM A254 Copper-brazed steel tubing 2. Steel Grade BHG1, SPCC, SPCD, SPCEN, ST14, ST15, ST16, DC04, DC05, DC06 3. Heat Treatment BK or NBK 4. Specification O D/ mm 4 4.2 4.76 6 6.35 7.8 8 9.52 W T 0.5-1.0mm (0.5-0.7mm common WT) Tolerance ±0.05mm Length 180Kg/coil; 700-1000m/coil; per customer’s request 5.
고 정밀 냉부착 DOM 용접 튜브, 좋은 기계적 특성과 제어된 OD/ID 정확성
High Precision Cold Drawn DOM Welded Tubes With Good Mechanical Properties High precision cold drawn DOM welded tubes are ERW carbon steel mechanical tubes processed by cold drawing over a mandrel to improve OD/ID accuracy, wall uniformity, concentricity, surface finish, and mechanical stability. They are suitable when ordinary ERW tubing is not precise enough for machining, press-fitting, bearing support, or controlled assembly clearance. For international purchasing, the
