steel mechanical tubing
"
OD25mm은 공랭장치를 위한 핀형 구리관을 세라테드
Serrated Finned Copper Pipe for Air Cooler About Finned Tubes A fin tube is a tube that has lots of fins around the outside surface. These fins act as a filter and a mechanism to transfer heat from the material inside the tube to the outside space or vice versa. Fin tubes are used in applications that require a transfer of heat from a hot fluid to a colder fluid through the tube's wall. ♦ Welded finned tubes ♦ Extruded finned tubes ♦ Welded helical solid finned tubes ♦ Welded
OD 420mm Torich 니켈 합금 파이프 200 201 50mm 두께
Nickel Alloy Pipe 200 201 The offered range of Nickel 200 Pipe and Nickel 201 Pipe are produced from 99.6% pure nickel alloy. This is thus imparting excellent magnetic and mechanical properties. The nickel pipe is exhibiting greater corrosion resistance property in an alkaline solution like caustic soda.Nickel 200 Pipe and Nickel 201 Pipe are also having good resistance ability all against highly pure non-oxidizing acid and pure halogen gas. The suppliers are offering the
냉각 압연 OD 609.6 밀리미터 ASTM A312 녹슬지 않는 용접관
ASTM A312 Seamless Welded and Heavily Cold Worked Austenitic Stainless Steel Pipes Product Description: The standard specifications include seamless, straight seam welded and heavily cold welded austenitic stainless steel tubing for high temperature and general corrosive service. There are several grades in this standard, and each steel grade shall confirm to the required chemical composition of C, Mn, P, S, Si, Cr and Cr, Ni, Mo, etc. All the pipes shall be furnished in the
인콜로이 840 니켈 기반의 원활 파이프
Incoloy 840 Nickel Based Seamless Pipe For For Low Temperature Environment Incoloy 840 is an austenitic nickel-chromium-iron alloy specially formulated for both high-temperature corrosion resistance and excellent low-temperature toughness, making it ideal for seamless pipe applications down to cryogenic conditions. Typical pipe sizes range from ½" to 24" OD with wall thicknesses from 0.035" to 0.5", supplied per major international standards. Below are detailed specifications
산화 저항 Superalloy Inconel 관 0.299 lbs/in3 8.28 g/cm3 980℃
Inconel Steel Tue are produced with Inconel Alloy Steel Grade InconelX-750 Mechanical component C:≤0.08 Cr:14.0-17.0 Ni+Co:≥70.0 Al:0.40-1.00 Ti:2.25-2.75 Fe:5.00-9.00 Nb+Ta:0.70-1.20 Co:1.00max Mn:1.00max Si:0.50max S:0.010max Cu:0.50max P:0.015max Data for material physical properties: Desity : 0.299lbs/in3,8.28g/cm3 InconelX-750 thermal conductivity θ/℃ 50 100 300 500 900 λ/(W/(m·℃)) 14.7 15.9 20.1 25.1 37.3 InconelX-750 line expansion coefficient θ/℃ 20～200 20～300 20～400
인콜로이 825 관 성형 파이프 니켈 합금 파이프
Incoloy 825 Tubing Pipe Nickel Alloy Pipe Quick detail: OD:3.18-114.3mm WT:0.5-12mm Standard:ASME SB163 Referenced documents: ASTMB829 ASTMB880 Material: N08825 Delivery condition:Annealed Chemical Composition: Alloy Nickel Cu Mo Fe Mn Max C Si Max S Max Cr Al Ti UNS N08825 38-46 1.5-3.0 2.5-3.5 22 min 1 0.05max 0.5 0.03 19.5-23.5 0.2 max 0.6-1.2 Nickel-Iron-Chromium-Molybdenum-Copper alloy UNS N08825 Annealed special steel tubes Mechanical properties Tensile Strength min ksi
OD60 ID50은 유압 실린더 파이프를 위한 속 빈 피스톤 로드를 연마했습니다
OD60 ID50 Honed Hollow Piston Rods for Hydraulic Cylinder TORICH has NICE quality of Honed Piston Rods,OD60 ID50 Piston Rods,Hollow Piston Rods Regular sizes we can produce: 60*50*5000mm 70*60*3500mm 70*60*4000mm 80*70*3500mm 80*70*4000mm 80*70*5500mm 80*70*7500mm 90*80*2000mm 90*80*3500mm 90*80*5500mm 90*80*7500mm 90*75*7500mm CHEMICAL COMPOSITION(%) Steel Grade C% Mn% Si% S% P% V% Ni% Cr% Mo% Cu% 1010 0.07-0.13 0.3-0.6 0.17-0.37 ≤0.015 ≤0.025 ≤0.08 ≤0.15 ≤0.15 1020 0.18-0
DIN2391 ST37.4 ST52 S45C 연마된 실린더
TORICH Shock Absorber Automobile Parts Using DIN2391 ST37.4 ST52 S45C Honed Tubing Cylinder Products Description: The honed cylinder tube is a high-precision steel tube material that is processed by cold or hot rolled. Beacuse the inside and outside wall without oxidation layer, so it can under high pressure, no leakage, high precision, high finish, cold bending deformation, flaring, flattening without cracks a bit, it is mainly used to produce pneumatic or hydraulic
ASTM A691 1 1/4 CrCL22 전기 융합 용접 파이프
ASTM A691 1 1/4 CrCL22 Electric-Fusion-Welded For High-Pressure Service At High Temperatures Material and Specification ASTM A691 1 1/4 CrCL22 is an electric-fusion-welded steel pipe designed for high-pressure service at high temperatures. It is commonly used in industries such as oil and gas, petrochemical, and power generation. This specification covers pipes with a nominal wall thickness ranging from 1/8 inch to 3 inches (3.2mm to 76.2mm) and a nominal diameter from 10
