alloy steel seamless tube
"
100Cr6 Gr15 이음새가 없는 합금강관 TORICH
100Cr6 Gr15 Seamless Alloy Steel Pipe TORICH TORICH is a professional steel tubes supplier from China with over 23 years manufacturing and exporting experience. Our main products are seamless precision pipe,carbon steel seamless precision pipe,alloy steel seamless precision pipe, stainless steel seamless precision pipe.The material we usually use for producing 100Cr6 Gr15 Seamless Alloy Steel Pipe is GCr15 100Cr6 100CrMnSi6-4 100CrMnSi6-6 100CrMo7 Steel Grade/Steel Material:
GOST 9941-81 합금 강철 파이프 매듭 없는 덥게 변형 된 파이프
GOST 9941-81 Alloy Steel Pipe: Seamless Warm-Deformed Tubes for Corrosion Resistant Applications Introduction GOST 9941-81 is a Russian industry standard that specifies the requirements for alloy steel seamless warm-deformed tubes used in corrosion-resistant applications. This standard ensures the quality and performance of the pipes, making them suitable for use in various industrial sectors. In this article, we will delve into the material, key features, chemical compositio
평범한 / 경사진 단부 UNS N06601 니켈 합금 스틸 튜브
UNS N06601 Nickel Alloy Steel Tubes Inconel 601 nickel-chromium-iron alloy is a general-purpose engineering material for applications that require resistance to heat and corrosion. The outstanding characteristic of Inconel 601 is its resistance to high-temperature oxidation. The alloy also has good resistance to aqueous corrosion, has high mechanical strength, and is readily formed, machined, and welded. The limiting chemical composition of Inconel 601 is listed in Table 1.
TP409 페라이트 스테인리스 강 이음매 없는 튜브 (일반 서비스용)
TP409 Ferritic Stainless Steel Tube: Stainless Steel Seamless Tube For General Service Introduction TP409 is a ferritic stainless steel tube commonly chosen for its excellent corrosion resistance and mechanical properties. It is widely used in a variety of industrial applications, including automotive exhaust systems, where strength and durability are critical. Below is a comprehensive guide covering the material, specifications, key features, chemical composition, mechanical
ASTM A519 1010 1020 1026 SRA +N 이음새가 없는 강철 관, 탄소 강철 이음새가 없는 관
ASTM A519 1010 1020 1026 SRA +N Seamless Steel Pipes Cutting Length Oil cylinder Seamless Carbon and Alloy Steel Mechanical Tubing ASTM A519 Size range: O.D.: 50-350mm W.T.:1-25mm L:max12000mm 1. Standard: ASTM A519 Oil cylinder Seamless Carbon and Alloy Steel Mechanical Tubing 2. Steel Grade: Carbon steel: SAE1010,SAE1020,SAE1026 Alloy steel: SAE4130,SAE4140 3. Proddction Method: Cold drawing or cold rolling We offer Cut to short lengths according to customer requirement and
냉각 압연/이음새가 없는 합금 강철 관 34CrMo4 42CrMo4 42CrMo를 냉각 압연했습니다
34CrMo4 42CrMo4 42CrMo Seamless Cold Drawn/Cold Rolled steel tube 34CrMo4: C: 0.30-0.37 Si: 0.40 Mn: 0.40-0.90 P: 0.035 S: 0.035 Cr: 0.90-1.20 Mo: 0.15-0.30 42CrMo4: C: 0.38-0.45 Si: 0.40 Mn: 0.60-0.90 P: 0.035 S: 0.035 Cr: 0.90-1.20 Mo: 0.15-0.30 42CrMo: C: 0.38-0.45 Si: 0.17-0.37 Mn: 0.50-0.80 Cr: 0.90-1.20 Mo: 0.15-0.25 Main Characteristics: No Oxidation Layer on the Outer and Inner Walls No Crack under Flaring and Flattening No Leakage under High Pressure No Distortion
ASTM A519 1010 1020 1026 4130 4140 이음새가 없는 탄소와 합금 강철 기계적인 배관
ASTM A519 1010 1020 1026 4130 4140 Seamless Carbon and Alloy Steel Mechanical Tubing ASTM A519 Seamless Carbon and Alloy Steel Mechanical Tubing Applications: for machinery, mechanical engineer Size range: O.D.:6-350mm W.T.:1-50mm L:max12000mm Special Smoothness Inside Surface,SSIS this tubing is intended for use where the inside surface is of prime importance. Usually we leave maching allowance for both OD and ID tolerance for further maching purpose. Method of tube forming:
보일러를 위한 ASTM B111 C71500 강관 U자관
TORICH ASTM B111 C71500 Copper Nickel Alloy Steel U Tube for Boiler This specification establishes the requirements for seamless tube and ferrule stock of copper and various copper alloys up to 3-1/8" in (80mm) inclusive, in diameter, for use in surface condenser, evaporators, and heat exchangers. The following coppers and copper alloys are apecified. Type: Copper Alloy Steel U Tube Application: For Heat Exchanger, Boiler, and Condenser Technique: Cold Drawn Material: C71500
정제 된 수압 실린더 튜빙 정밀 냉면 수직 튜브 ISO H8/H9 ID 허용도와 자동차용 Ra 최대 0.40 μm
Honed Hydraulic Cylinder Tubing — Precision Cold-Drawn Seamless Tube for Automotive Material Honed hydraulic cylinder tubing is a precision cold-drawn seamless steel tube whose inside diameter (ID) is honed or skived & roller burnished (SRB) to achieve tight dimensional tolerances and a very smooth bore—critical for hydraulic cylinders where sealing performance, friction, and service life depend heavily on ID quality. Typical steel families include EN precision grades (E235 /
