heat exchanger tubes
"
기계장치 건축을 위한 용접된 이음새가 없는 스테인리스 특별한 강관
Wall Thickness with 1.0 to 3.0mm, Mirror and Satin Finish : MATERIAL 201/304/316 STANDARD ASTM A554 PLACE OF ORIGIN CHINA SIZE 20 x 40 to 60 x 120mm THICKNESS 1.0~3.0 mm LENGTH 6m or as customers' request SURFACE 180G, 320G, 400G Satin / Hairline, 400G, 500G, 600G, 800G Mirror finish, Brushed, TIN titanium plated COLOR NON TEST Squash test, Extended test, Water pressure test, Crystal rot test, Heat treatment, NDT DELIVERY 7-30 days after receiving deposit or L/C depending on
고열 서비스를 위한 ASTM A335 합금 강관 OD 6 - 450mm
ASTM A335 Alloy Steel Pipe OD 6 - 450mm for High Temperature Services ASTM A335 Seamless ferritic and alloy steel pipe for high temperature service Applications: for Boilers,Superheaters,Heat-Exchangers Size range: O.D.:6-420mm W.T.:1-50mm L: according to customer requirement Astm a103 ASTM A335 ferritic alloy steel seamless steel pipe Steel Grade and Chemical Compositions: Steel Grade C Mn P S Si Cr Mo max max max max max min P5 0.15 0.30-0.60 0.025 0.025 0.50 4.00-6.00 0.45
UNS N08825 ASTM B163 표준 니켈 합금강관
ASTM B163 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat Exchanger Tubes This specification covers seamless tubes of nickel and nickel alloy for use in condenser and heat-exchanger service. This covers outside diameter and average wall, or outside diameter and minimum wall tube. Tube shall be furnished in the alloys and conditions defined by this specification. The material shall conform to the composition limits of nickel, copper, molybdenum,
GB/T19447 TORICH 0.1 밀리미터 이음새가 없는 구리관
GB/T19447 Seamless Copper and Copper Alloy Steel Low Fin Enhanced Evaparation Tube Quick Detail: The low-finned tube is produced by rolling (three-roll diagonal rolling), and its working principle is as follows: a mandrel is lined with the smooth tube, the tube material moves in a spiral straight line under the drive of the roller blade, and finnings are gradually processed on its outer surface through the pass formed by the rolling groove and mandrel. In order to more
20X20H14C2 AISI 309 스테인리스강 고온 용기용 이음매 없는 파이프
20X20H14C2 AISI 309 Stainless Steel Seamless Pipe For High Temperature Container Material 20X20H14C2 (also known as AISI 309) stainless steel is a chromium-nickel alloy steel known for exceptional oxidation and corrosion resistance at elevated temperatures. Its chemical composition and microstructure make it ideal for manufacturing seamless pipes used in high-temperature containers, furnaces, and heat exchangers. Specification Standard: ASTM A213 / A312, ASME SA213 / SA312
ASTM A954 등급 5S 오스텐이틱 크롬, 니켈, 실리콘 합금 철강 꿰매지 않는 파이프 일반 용도
ASTM A954 Grade 5S 10S 40S 80S Alloy Steel Pipe: Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless Pipe for General Purpose Material ASTM A954 is a specification for austenitic chromium-nickel-silicon alloy steel seamless pipes. These pipes are designed for general-purpose applications and are known for their excellent corrosion resistance, high strength, and good ductility. The alloying elements contribute to the material's overall performance, making it suitable for
ASTM A789 UNS S32750 최고이 이중 통신 2507 듀플렉스 스테인리스강 코일
ASTM A789 UNS S32750 Super Duplex 2507 Duplex Stainless Steel Coils Applications: For chemical , boiler industry,heat-exchangers Technique: Cold worked and hot worked Alloy or not: Alloy Secondary or not: Non-Secondary Steel Grade/Steel Material: Material 200 series: 201, 202 300 series: 304, 304L, 304H, 310S, 316, 316L, 317L, 321,310S,309S,2205,2507,2520 400 series: 410, 410S,420, 430, 431, 440A,904L Size range: O.D. 8-530mm W.T. 0.5mm-30mm Length max 12000mm Characteristic:
ASTM B165 광휘 어닐링 니켈 구리 이음새가 없는 스테인리스강관
ASTM B165 Bright Annealing Nickel-Copper Seamless Stainless Steel Pipe Mechanical Properties of Small-Diameter and Light-Wall Tubing Condition Tensile Strength(Mpa) Yield Strength min Mpa Elongation in 2in or 50mm min% Annealed 585max 195 32 Half-hard 585min 380 12 Full hard 760min 620 3 Delivery Conditions : 1. Annealed - Soft,with a dull matte finish 2. Stress Relieved - Thermally treated below the annealing tempreature to relieve the major portion of the internal stress,
ASTM A691 1 1/4 CrCL22 전기 융합 용접 파이프
ASTM A691 1 1/4 CrCL22 Electric-Fusion-Welded For High-Pressure Service At High Temperatures Material and Specification ASTM A691 1 1/4 CrCL22 is an electric-fusion-welded steel pipe designed for high-pressure service at high temperatures. It is commonly used in industries such as oil and gas, petrochemical, and power generation. This specification covers pipes with a nominal wall thickness ranging from 1/8 inch to 3 inches (3.2mm to 76.2mm) and a nominal diameter from 10
