precision seamless pipe
"
TORICH JIS G3429 STH12 STH21 자동차 정확성 탄소 스틸 튜브
Torich JIS G3429 STH12 STH21 Automotive Precision Steel Tube Introduction: Standard: JISG3429 Type:Carbon Diameter: Od: 5-420mm, Wall thickness: 0.5-50mm length:12mmax Grade: STH 21, STH11,STH12,STH22,STH31 Produce method:Seamless Usage: Pipes are used in oil, air, etc. Feature: High pressure Chemical components: C Si Mn P S Ni Cr Mo STH11 ≤0.5 0.1-0.35 ≤1.8 ≤0.035 ≤0.035 - - - STH12 0.3-0.41 0.1-0.35 1.35-1.7 ≤0.03 ≤0.03 - - - STH21 0.25-0.35 0.1-0.35 0.4-0.9 ≤0.03 ≤0.03 ≤0
픽링 닦은 904L 1.0 밀리미터 스테인레스 강 용접관
Pickling Polished 904L Big Welded Stainless Steel Pipe Stainless steel seamless pipe is a long steel with a hollow cross-section and no seams around it. The thicker the wall thickness of this product, the more economical and practical it will be, and the thinner the wall thickness, the greater the processing cost. The process of this product determines its limited performance. Generally, the precision of seamless seamless steel tubes is low: uneven wall thickness, low
TORICH 냉기는 310s 스테인레스 강 인발관을 회전시켰습니다
Precision Cold Rolled 300 series 310S stainless steel seamless tube Materials: 310S Size : Thickness : 0.3mm-30mm Length: 20mm-12000mm Outer Diameter: 10mm-80mm Standard: ASTM, AISI, DIN, EN, GB, JIS Surface: 2D, 2B, No.4, No.8, HL(hairline) BA 8K(mirror) polished, etc Trade Term: CIF, FOB, CIP, EXW, DAP Payment: T/T(30% for deposit), L/C Chemical Composition Material C Si Mn P S Cr Ni Mo 310S ≤0.08 ≤1.5 7.5-10.7 ≤0.035 ≤0.03 24.0-26.0 19.0-22.0 - Menchanical Property
증발기를 위한 나선부 이음새가 없는 이탄탈륨 티타늄 튜브
Evaporator Internal And External Thread Fin High Efficiency TA2 Titanium Tube Specification range: Φ( 8.0-38.0)mm Χ Τ ( 0.5-2.0)mm Shape: Fin, Pockmarked Surface, Spiral sheet, Point (surface and tube bore) Material grade: Titanium and titanium alloy tubes (TA1, TA2, TA3, ta8, ta8-1, ta9, ta9-1, TA10, gr.1, gr.2, gr.7, gr.12, gr.16, etc.) austenitic stainless steel pipe SUS304, SUS316L, 321, 904L, etc Ferritic stainless steel pipe 409,409L,439L,SUS445J2 Duplex stainless
A333 Gr.6 저온 합금 무계목 강관 대직경 두꺼운 벽
A333 Gr.6 Large Diameter Thick Wall Low Temperature Alloy Seamless Steel Pipe TORICH is a professional low temperature steel tubes manufacturer of precision steel tubes for Low temperature service and other application with required Notch Toughness , which is equipped with 20 lines of pipe production. Low temperature tubes is usually produced by Gr1,Gr2,Gr3,Gr4,Gr6,Gr7 ,Gr8,Gr9,Gr10,Gr11 ,09DG,09MnVDG,16MnDG, 10MnDG etc ,production method can be cold drawning or cold rolled.
GB/T 24187 증발기용 정밀 철강관
GB/T 24187 Precision Steel Tube Cold Drawn Precision Single Welded Steel Tube For Evaporator Material The material used for the GB/T 24187 Precision Steel Tube Cold Drawn Precision Single Welded Steel Tube For Evaporator is high-quality carbon steel or low-alloy steel, depending on the specific requirements of the application. Specification The specifications of the GB/T 24187 Precision Steel Tube Cold Drawn Precision Single Welded Steel Tube For Evaporator are as follows:
GB/T 31940 스테인리스 스틸 튜브 양금속 복합식 부식 저항 스틸 파이프 유체 운송
GB/T 31940 Stainless Steel Tube Bi-Metal Composite Corrosion Resistance Steel Pipe For Fluid Transportation The GB/T 31940 Stainless Steel Tube Bi-Metal Composite Corrosion Resistance Steel Pipe presents a cutting-edge solution for fluid transportation, ensuring durability and efficiency. This article delves into its material components, specifications, key features, chemical composition in a tabular presentation, mechanical properties summarized in a table, the steel grade,
ASTM A691 1 1/4 CrCL22 전기 융합 용접 파이프
ASTM A691 1 1/4 CrCL22 Electric-Fusion-Welded For High-Pressure Service At High Temperatures Material and Specification ASTM A691 1 1/4 CrCL22 is an electric-fusion-welded steel pipe designed for high-pressure service at high temperatures. It is commonly used in industries such as oil and gas, petrochemical, and power generation. This specification covers pipes with a nominal wall thickness ranging from 1/8 inch to 3 inches (3.2mm to 76.2mm) and a nominal diameter from 10
DIN 2393-2 St44.2 차갑게 당긴 용접 튜브 ERW 탄소 정밀 철강 튜브 자동차
DIN 2393-2 E235 ST37.2, ST52.3, STKM11, STKM12 Cold Drawn Welded Tube ERW Carbon Steel Precision Steel Tube for Automobile Material DIN 2393-2 specifies the technical delivery conditions for welded precision steel tubes made from carbon steel. These tubes are primarily used in the automotive industry due to their excellent mechanical properties and precision. The materials covered under this standard include E235, ST37.2, ST52.3, STKM11, and STKM12, which are known for their
