stainless tube steel
"
높은 장력 탄소 이음새가 없는 강철 관 얇은 벽 EN10305-1 OD 4-80mm
TORICH High Tensile Thin Wall 34mm MS 1010 Plastic End Caps for AISI 1020 46mm 4130 Carbon Seamless Mild ASTM A513 1026 DOM Tube TORICH High Tensile Thin Wall 34mm MS 1010 Plastic End Caps for AISI 1020 46mm 4130 Carbon Seamless Mild ASTM A513 1026 DOM Tube Steel Grade/Steel Material: E155 E195 E235 E275 E355 Delivery Condition: N Normalized Size Range: O.D.:4-80mm W.T.:1-8mm L:max 6000mm Characteristic: Good concentricity Good OD and ID tolerance High precision Stable
냉각 압연 태도는 12M 이음새가 없는 합금 스틸 튜브를 관을 답니다
Precision steel tubes destined for production of bearings Chemical Composition:GCr15 C:0.95-1.05 Mn:0.20-0.40 Si:0.15-0.35 S:≤0.020 P:≤0.027 Cr:1.30-1.65 100Cr6 C :0.95～1.05 Si:0.15～0.35 Mn:0.25～0.45 S :≤0.025 P :≤0.025 Cr:1.40～1.65 Ni:≤0.30 Cu:≤0.25 Mo:≤0.08Note:Ni+Cu≤0.50 Material S1541 GCr15 G4051 SUJ2 100Cr6(1.3505) Standard YB-T 4146 SKFD33 S13000 GOST801-78 Application Automobile parts Material S1541 GCr15 G4051 SUJ2 100Cr6(1.3505) Characteristic Bearing steel has high
자동 고탄소 크롬 100cr6 베어링 관 16MnCr5
HIGH-CARBON CHROMIUM BEARING STEEL TUBES SEAMLESS BEARING STEEL TUBE GRADE 100CR6 Chemical Composition: GCr15 C:0.95-1.05 Mn:0.20-0.40 Si:0.15-0.35 S:≤0.020 P:≤0.027 Cr:1.30-1.65 100Cr6 C :0.95～1.05 Si:0.15～0.35 Mn:0.25～0.45 S :≤0.025 P :≤0.025 Cr:1.40～1.65 Ni:≤0.30 Cu:≤0.25 Mo:≤0.08Note:Ni+Cu≤0.50 Material S1541 GCr15 G4051 SUJ2 100Cr6(1.3505) Standard YB-T 4146 SKFD33 S13000 GOST801-78 Application Automobile parts Material S1541 GCr15 G4051 SUJ2 100Cr6(1.3505) Size range:
고주파 용접 알루미늄 2mm 나선형 지느러미 붙은 관
High Frequency Welded Spiral Finned Aluminum Fins Tube Finube Fin Caoutchouc Advantages of high frequency welding spiral finned tube 1. The installation is simple and economical. The large length of high-frequency welded spiral finned tube can reach more than 20 meters, and there is no connection point, which makes the installation more economical and fast, and reduces the probability of water leakage at the connection. 2. The maintenance is simple. After the installation of
ASTM B163 니켈 합금 관, 열 교환기를 위한 니켈 합금 Stainles 강철 관
ASTM B163 Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes Steel tubes for Heat Exchangers and Condensors Applications: Steel tubes for Heat Exchangers and Condensors Size range: O.D.:6-127mm W.T.:1-30mm L: according to Customer requirement U- Tubes available Nickel UNS N02200, Low-carbon Nickel UNS N02201, Nickel-copper alloy UNS N04400 (Monel400,Nicu30Fe), Nickel-chromium-iron alloy UNS N06600 (Inconel600), Nickel-chromium-iron alloy UNS N06601, Nickel
ASTM B163Stainless 강철 Inconel 관 Monel400의 Nicu30Fe Incoloy 825 관
ASTM B163 Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes Steel tubes for Heat Exchangers and Condensors Applications: Steel tubes for Heat Exchangers and Condensors Size range: O.D.:6-127mm W.T.:1-30mm L: according to Customer requirement U- Tubes available "Nickel UNS N02200, Low-carbon Nickel UNS N02201, Nickel-copper alloy UNS N04400 (Monel400,Nicu30Fe), Nickel-chromium-iron alloy UNS N06600 (Inconel600), Nickel-chromium-iron alloy UNS N06601, Nickel
GB/T 5312 탄소/탄소 - 기름을 바르는 망간 이음새가 없는 강철 관
GB/T 5312 Carbon and Carbon-Manganese Steel Seamless Steel Tubes and Pipes for Ship Material:320/360/410/460/490 and so on. OD:3-420mmWT:0.5-50mmLength:3-12m Characteristic: Good concentricityGood OD and ID toleranceHigh PrecisionStable qualitySmooth RoughnessTORICH QUALITY ASSURANCE Production Processs:RAW MATERIAL↓INCOMING INSPECTION↓STORAGE → CUTTING→HAMMERING → PICKING LUBRICATION → CLEANING → PHOSPHORI CLEAN↓ ENDS CUTTING←STRAIGHTENING←HEAT TREATMENT↔MIDDLLE CHECK↔ COLD
60MM 직경 탄소 이음새가 없는 강관 DIN17175 JIS G3472 STAM290GA 13MO3
DIN17175 JIS G3472 STAM290GA 13MO3 Carbon 60MM Diameter Seamless Steel Pipe Sizes (O.D. x W.T): from 13.7mm -- 219.1mm x 1.5mm to 28mm Stanard: DIN17175 Steel Grade: ST35.8,ST45.8,15Mo3,13CrMo44 Surface: oiled or black painted to prevent rust Marking: as per customer's requirement DIN17175 15Mo3 seamless cold drawn boiler steel tube Steel grade 15Mo3 Chemical Composition & Mechanical properties C Mn P S Si Mo Tensile Strength Yeild point Elongation 0.12-0.20 0.40-0.80 0
열처리 ISO/FD683-17 강철 기계적인 배관 냉각 압연 강관
Heat Treated ISO / FD683-17 Steel Mechanical Tubing Cold Drawn Steel Pipe ISO/FD683-17 Heat-treated Ball and roller bearing steel tubes for Machinery and construction Standard : ISO/FD683-17 Steel grade: 100Cr6,100CrMnSi4-4,100CrMnSi6-4,20Cr3 20MnCr4-2 etc Steel Grade Material Chemical composition % C Si Mn P max S max Cr Mo Ni Through-hardening bearing steels B1 100Cr6 0.93-1.05 0.15-0.35 0.25-0.45 0.025 0.015 1.35-1.60 ≤0.10 / B2 100CrMnSi4-4 0.93-1.05 0.45-0.75 0.90-1.20 0
