이음새가 없는 강철 관

ASTM A210 Grade A-1 Seamless Steel Tube for Boiler Tubing Product Details Standard:ASTM A210 Material :Grade A-1 And Grade C OD :12.7-127mm ID :0.9-12.7mm Technique: Cold-drawn Surface Condition:Pickling Or Shot Blasting Application:For Boilers,Superheaters,Steam linepipes of boilers Chemical Composition: Steel Grade and Chemical Compositions: Grade C Mn P S Si A-1 ≤0.27 ≤0.93 ≤0.035 ≤0.035 ≥0.10 C ≤0.35 0.29-1.06 ≤0.035 ≤0.035 ≥0.10 Mechanical proporties: Grade Tensil

ASTM A192 Carbon Steel Boiler Tubes For High Pressure Boilers Size: OD: 12.7-177.8mm WT: 1-25.4mm Length: according to customer requirement Application: For Boilers,Superheaters, Heat-Exchangers, High-pressure Boilers Manufacture: Tubes are manufactured by seamless process and both hot finished and cold finished are applicable Heat treatment: Hot finished tubes need not be heat treated. Cold Finished tubes are heat treated after the final cold finishing pass at a temperature

GCr15 100Cr6 Seamless Steel Tube Steel Grade/Steel Material: Steel Grade mass fraction % C Si Mn P S Cr Mo GCr15 0.95-1.05 0.15-0.35 0.20-0.40 ≤0.027 ≤0.020 1.30-1.65 ≤0.10 100Cr6 0.93-1.05 0.15-0.35 0.25-0.45 ≤0.025 ≤0.015 1.35-1.60 ≤0.10 100CrMnSi6-4 0.93-1.05 0.45-0.75 1.00-1.20 ≤0.025 ≤0.015 1.40-1.65 ≤0.10 100CrMnSi6-6 0.93-1.05 0.45-0.75 1.40-1.70 ≤0.025 ≤0.015 1.40-1.65 ≤0.10 100CrMo7 0.93-1.05 0.15-0.45 0.25-0.45 ≤0.025 ≤0.015 1.65-1.95 0.15-0.30 Delivery Condition:

Torich 133*4*4113mm 304L Alloy Sputtering Sputtering Target Stainless Steel Tube Grade:304L Specification: 133*4*4113mm Tolerance of OD:0.1-0.4mm Tolerance of ID:124.5-125.2mm Tolerance of Length:-0/+10mm Ellipticity: Roundness deviation≤0.10mm Straightness deviation: Overall length direction≤0.5mm Standard:DIN2462 Special requirements: 1. Quality requirements: Tolerance of OD:0.1-0.4mm Tolerance of ID:124.5-125.2mm Tolerance of Length:-0/+10mm Ellipticity: Roundness

Torich 133*4*4113mm 304L Planar Sputtering Target Sputtering Target Stainless Steel Tube Torich 133*4*4113mm 304L Sputtering Target Stainless Steel Tube Grade:304L Specification: 133*4*4113mm Tolerance of OD:0.1-0.4mm Tolerance of ID:124.5-125.2mm Tolerance of Length:-0/+10mm Ellipticity: Roundness deviation≤0.10mm Straightness deviation: Overall length direction≤0.5mm Standard:DIN2462 Special requirements: 1. Quality requirements: Tolerance of OD:0.1-0.4mm Tolerance of ID

EN10305-1 E215 E235 E355 Galvanized Steel Tube with High Precision EN10305-1 tubes are produced by seamless cold drawn, and bright annealed in a controlled atmosphere furnace to keep the surface quality bright and smooth, then galvanized coating the surface. Sault spray test will be carried out if a report is needed! Quick Detail: DIN2391 St37.4 Galvanized Steel Tube with High Precision EN10305-1 E215 E235 E355 Galvanized Steel Tube with High Precision Steel Grade: St35, St37

ASTM A333 Seamless Steel Pipe Standard specification for seamless and welded steel pipe for low -temperature service and other applications with required notch toughness. Referenecd documents: A370 Test methods and definitions for mechanical testing of steel products. A999 Specification for general requirements for alloy and stainless steel pipe. A671 Specification for electric fusion welded steel pipe for atmospheric and lower temperatures E23 Test methods for notched bar

SAE 1020 carbon steel for automobile outer tube Cabon steel grade SAE 1020 is a low hardness and low tensile strength alloy. The Brinell hardness of the SAE 1020 Steel Tube ranges between 119 – 235, whereas its tensile strength is between 410 MPa to 790 MPa. Though it lacks some of the characteristics of a conventional carbon steel grade, the SAE 1020 Steel Tube exhibits other important characteristics such as high strength, high machinability, high ductility as well as good

SAE 1022 carbon steel for automobile outer tube 1022 is a general purpose low tensile low hardenability carbon steel generally supplied in the black hot rolled condition, with a typical tensile strength range 360 - 560 Mpa and Brinell hardness range 100 - 170.Characterised by excellent weldability, fairly good machinability with reasonable strength and good ductility. 1022 due to its very low hardenability will through harden only in very small sections to relatively moderate