니켈 합금 튜브

UNS N04400 Monel 400 Nickel Alloy Steel Products It is a solid solution alloy that may be hardened only by cold working . It has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environment. Alloy 400 is widely used in many fields ,especially marine and chemical processing , Typical applications are : valves and pumps; pump and propeller shafts; marine fixtures and fasteners; electrical and electronic components;springs;

ASTM B444 INCONEL 625 UNS N06625 Seamless nickel Alloy Incoloy 825 Inconel 825 forged cuts Alloy 825 has excellent resistance to stress corrosion cracking and good pitting resistance in all environments except strongly oxidizing chloride solutions. Alloy 825 is used in chemical processing, pollution control, oil and gas recovery, acid production, pickling operations, nuclear fuel reprocessing Alloy 825 Specification UNS W.Nr N08825 2.4858 Alloy 825 Mechanical properties:

ASTM B444 Inconel 625 Seamless Nickel Alloy Pipes UNS N06625 2.4856 Alloy 625 Inconel 625 Seamless Pipes ASTM B444 Size: Shape Size (OD,T) Tube Pipe Out Diameter:Φ10~300mm Wall Thickness:THK 1~80mm Length:Can be customized Bar Forging Sheet/Strip Wire Pipe ASTM B446 ASTM B564 ASTM B443 - ASTM B444 ASTM B704 ASTM B705 Inconel 625 Seamless Pipes ASTM B444 Chemical Composition: Ni Fe Al Cr C Ti Mo Mn Nb Si Co Min 58 - - 20 - - 8 - 3.15 - - Max - 5.0 0.4 23 0.1 0.4 10 0.5 4.15 0

A358 / A358M High Temperature Inconel Welded Steel Tube , Electric Fusion Welded Steel Pipe ASTM A358/A358M Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service Grade: 316L, 317, 317L, 321, 321H, 348,S32050, N08800. Welding: The joints are full penetration bouble-welded or single-welded Heat treatment: All pipes are with heat treatment condition. Please specify your heat treatment requirement in the enquiry. Permissible

Inconel Steel Tube with Inconel Alloy Steel Grade Inconel 718 Mechanical component : Standard Quality High Purity C:≤0.08 0.02-0.06 0.02-0.06 Cr:17.0-21.0 17.0-21.0 17.0-21.0 Ni:50.0-55.0 50.0-55.0 50.0-55.0 Co:≤1.0 ≤1.0 ≤1.0 Mo:2.8-3.3 2.8-3.3 2.8-3.3 Al:0.3-0.7 0.3-0.7 0.3-0.7 Ti:0.75-1.15 0.75-1.15 0.75-1.15 Nb:4.75-5.50 5.0-5.50 5.0-5.50 B:0.006max 0.006max 0.006max Mg:0.01max 0.01max 0.005max Mn:0.35max 0.35max 0.35max Si:0.35max 0.35max 0.35max P:0.015max 0.015max 0

Inconel Steel Tue are produced with Inconel Alloy Steel Grade InconelX-750 Mechanical component C:≤0.08 Cr:14.0-17.0 Ni+Co:≥70.0 Al:0.40-1.00 Ti:2.25-2.75 Fe:5.00-9.00 Nb+Ta:0.70-1.20 Co:1.00max Mn:1.00max Si:0.50max S:0.010max Cu:0.50max P:0.015max Data for material physical properties: Desity : 0.299lbs/in3,8.28g/cm3 InconelX-750 thermal conductivity θ/℃ 50 100 300 500 900 λ/(W/(m·℃)) 14.7 15.9 20.1 25.1 37.3 InconelX-750 line expansion coefficient θ/℃ 20～200 20～300 20～400

Inconel Steel Tubes are produced with Alloy Steel Grade Inconel 625 Chemical component:% max C:≤0.10 Cr:20.0-23.0 Co:≤1.00 Mo:8.0-10.0 Al :≤0.40 Ti:≤0.40 Nb:3.15-4.15 Fe:≤5.00 Mn:≤0.50 Si:≤050 P:≤0015 S: ≤0.015 Cu:≤0.07 Physical comstants : Density,lb/cu in 0.305 gram/cc 8.44 Characteristic of material: excellent resistance to corrosion oxidation resistance to engage good tensile properties from cryogenic to 980℃ good fatigue properties from cryogenic to 980℃ Inconel 625

Inconel Steel Tube with alloy steel grade Inconel 600 Inconel 600 is use in manufacture of aircraft engine parts,aerospace structural components and chemical equipment. Inconel Tube Characteristic:nickel-chromium-iron-based solid solution strengthened alloy. Good high temperature corrosion Oxidation resistance Excellent hot and cold processing Welding performace In the following 700℃ hace a satisfactory heat resistance and high plasticity. Inconel Tube Use in chemical

Stainless Tubing ASTM B167 Nickel-Chromium-Iron Alloys(UNS N06600, N06601,N06690,N06025 and N06045) Seamless Pipe and Tube ASTM B167 Nickel-Chromium-Iron Alloys(UNS N06600, N06601,N06690,N06025 and N06045) Seamless Pipe and Tube In cold-worked annealed, hot-worked annealed, and hot finished seamless pipes and tube for general corrosion resistant and heat resistant application Applications: Steel tubes for general corrosion resistant and heat resistant application Size range: