alloy steel seamless pipe
"
ISO9001은 N06625 인코넬 625 배출 튜빙을 증명했습니다
Inconel 625 Tubes Sans Soudure for Heat Exchanger Nickel and Nickel alloy referred to the alloy’s main elemental contents of Ni, Cu, Cr, Fe and Mo. Those all characterized by its combination performance of high corrosion resistance and heat ability at temperature 650 ~ 1000 °C. According to main alloy elements content can divide: Ni –Cr – Mo alloy (Inconel 600 Series) Ni-Cr-Fe alloy (Incoloy 800 Series) Ni - Mo – Ni – Cu – (Hastelloy Series) Pure Nickel and low alloy nickel
저온 ASTM A334 Gr.1 Gr.6 이음새가 없는 용접된 탄소 스틸 튜브
Low Temperature ASTM A334 Gr.1 Gr.6 Seamless Welded Carbon Steel Tubes Product Description This specification covers several grades of minimum-wall-thickness, seamless and welded, carbon and alloy-steel tubes intended for use at low temperatures. Some product sizes may not be available under this specification because heavier wall thickness has an adverse affect on low-temperature impact properties. Standard ASTM A334 O.D. 3.2 - 500 mm W.T. 0.5 - 30 mm Length Max 12000 mm
JIS G3452 탄소 10.5 밀리미터 냉각 압연 이음 없는강관
JIS G 3452 Carbon steel pipes for ordinary piping JIS G3452 Carbon Steel Pipes for Ordinary Piping specifies the carbon steel pipe, hereinafter referred to as the "pipes", used for the pipings for conveying steam, water, oil, gas, air, etc. at comparatively low working pressure. CHEMICAL COMPOSITION unit (%) Steel grade P S SGP 0.040max 0.040max Note: Special steel grade is also available, according to customer request. MECHANICAL PROPERTIES Steel grade Tensile strength Mpa
구리 코팅된 이음새가 없는 8 밀리미터 Od 낮은 핀형 관
Copper Coated Seamless Low Finned Tube PRODUCT DESCRIPTION: Keyword: Copper Low Fin Tube Material: C10200, C11000 Etc Fin Thickness: 0.1mm - 2mm Tube OD: 8mm - 55mm Length: max 12m Application: For Boiler And Heat Exchanger End Protector: Plain End / Beveled End Surface: Copper Coated Test and Inspection: Tension Test, Flaring Test, Flange Test, Reverse Test, Hardness Test, Hydrostatic or Nondestructive Electric Test etc QUALITY CONTROL: Incoming Raw Material Inspection Raw
ASTM A358 304 스테인리스 스틸 파이프
ASTM A358 304 Stainless Steel Pipe: Electric Fusion Welded Stainless Steel Pipe For High Temperature Service Introduction ASTM A358 304 stainless steel pipe is an electric fusion welded stainless steel pipe designed for high temperature service. It is widely used in various industries due to its excellent corrosion resistance, high strength, and durability. This article provides an overview of the material, specification, key features, chemical composition, mechanical
ASTM F1083 아연 도금 용접 강관 (울타리 구조용)
ASTM F1083 NPS1 NPS2 NPS3 NPS4 Welded Steel Tube Hot-Dipped Galvanized Welded Steel Tube for Fence Structures Material ASTM F1083 specifies the requirements for welded steel tubes used in fence structures, particularly those that are hot-dipped galvanized. These tubes are designed to provide durability and corrosion resistance, making them ideal for outdoor applications. Specification The specification covers various nominal pipe sizes (NPS) including NPS1, NPS2, NPS3, and
ASTM A312 TP316 유체 공학용 가접된 아우스테니틱 스테인리스 스틸 파이프
ASTM A312 TP304 TP309S TP310S TP316 Welded Steel Tube Welded Austenitic Stainless Steel Pipes for Fluid Engineering Introduction ASTM A312 is a standard specification for seamless and welded austenitic stainless steel pipes intended for high-temperature and general corrosive service. This article focuses on the specific grades TP304, TP309S, TP310S, and TP316, detailing their material properties, specifications, key features, chemical composition, mechanical properties,
JIS G3442 SGPW 용접된 철강관 일반 파이프에 용접된 철강관
JIS G3442 SGPW Welded Steel Tube Galvanized Steel Pipes for Ordinary Piping Introduction JIS G3442 is a Japanese Industrial Standard that specifies the requirements for welded steel tubes used in ordinary piping applications. These pipes are often galvanized to enhance their corrosion resistance, making them suitable for various environments. This article delves into the material specifications, key features, chemical composition, mechanical properties, steel grades,
니켈, 200/201 스테인리스 관을 가진 100mm 스테인리스 배관
ASTM B161 Nickel Seamless Pipe and Tubes for Heat Exchangers and Condensers Applications: Steel tubes for Heat Exchangers and Condensers Size range: O.D.:6-127mm W.T.:1-30mm L: according to Customer requirement Steel Grade: UNS N02200 Nickel UNS N02201 Low-carbon nickel Manufacture: Seamless Cold Drawn. Test Method: Hydrostatic Test TABLE 2 Chemical Requirements Chemical Compostion Composition, % Element Nicel (UNS N02200) Low-Carbon Nickel (UNS N02201) Ni,A min 99.00 99.00
