alloy steel seamless tube
"
이음새가 없는 냉각 압연 강철 관 34CrMo4 42CrMo4 42CrMo는 강철 관을 냉각 압연했습니다
Alloy steel tubes 34CrMo4 42CrMo4 Seamless steel tubes with alloy steel grade 34CrMo442CrMo4 34CrMo4: C: 0.30-0.37 Si: 0.40 Mn: 0.40-0.90 P: 0.035 S: 0.035 Cr: 0.90-1.20 Mo: 0.15-0.30 42CrMo4: C: 0.38-0.45 Si: 0.40 Mn: 0.60-0.90 P: 0.035 S: 0.035 Cr: 0.90-1.20 Mo: 0.15-0.30 42CrMo: C: 0.38-0.45 Si: 0.17-0.37 Mn: 0.50-0.80 Cr: 0.90-1.20 Mo: 0.15-0.25
JIS G3462 합금 강 보일러와 열 교환기 튜브
JIS G3462 ALLOY STEEL BOILER AND HEAT EXCHANGER TUBES JIS Specification alloy steel Tubes are used for high temperature service applications. Seamless Alloy Steel Tubes according to JIS G3462 Grade STBA 12 are reheated and furnished in full annlealed,isothermal annealed or normalised quenched and tempered condition. JIS G3462 Grade STBA 12 Alloy Steel Seamless Tubes have a typical chemistry with additions of 0.45-0.65 Molybdenum.Bearing minimum tensile strength of 380 Mpa JIS
고온 환경 합금 강철 이음새가 없는 관 ASTM B674, STM B619
Alloy Steel Pipe Hastelloy C-4 Hastelloy C-4 Application: Hastelloy C-4 has been widely used in most of the chemical industry and high-temperature environments. Typical fields of application: ● flue gas desulfurization system ● pickling and acid regeneration plant ● production of acetic acid and agrochemicals ● production of titanium dioxide (chloride method) ● electrolytic plating The corrosion resistance of Hastelloy C-4: Higher molybdenum and chromium content make
GB/T 19001-2008를 가진 특별한 강관 탄소 강철 직사각형 배관 설계
Special Steel Pipe , Steel Rectangle Tubing for Construction application Standard: ASTM A500 Steel Rectangle Tubing Cold-Formed Welded Carbon Structural Tubing in Rounds and Shapes Rectagnle and Square Applications: for construction of bridges, and buildings, and for general strcutrual purposes For Algricultrual Michinery, Engineering etc. Size range: Square tubes O.D. :20-20 to 500-500mm W.T.:1-24mm L:max12000mm Rectangle tubes O.D. :20-30 to 400-600mm W.T.:1-24mm L
4340 크로몰리 합금강 이음매 없는 원형 튜브 (고온 서비스용)
4340 Chromoly Alloy Steel Seameless Round Tube for High Temperature Service AISI 4340 seamless chromoly tubing is a medium-carbon, low-alloy steel tube engineered for elevated-temperature applications, offering exceptional strength, toughness, fatigue resistance, and wear properties. It is manufactured by cold drawing or hot pilgering processes to tight tolerances, yielding a smooth surface finish and uniform mechanical properties. Typical dimensions range from 10 mm to 200
Mechinery 냉각 압연 이음새가 없는 강철 관, 탄소 및 합금 강철 기계적인 배관
Cold Drawn Seamless Carbon and Alloy Steel Mechanical Tubing with Carbon and Alloy Steel Grade Cold Drawn Seamless Carbon and Alloy Steel Mechanical Tubing Size range: O.D.:6-450mm W.T.:1-50mm L:max12000mm Grade: 1010,1020,4130,4140,25CrMo,30CrMo,34CrMo4 Steel Grade and Chemical Compositions: Steel C Mn P S Si Cr Mo Grade max max max max min 1008 0.10 0.30-0.50 0.040 0.050 1010 0.08-0.13 0.30-0.60 0.040 0.050 1018 0.15-0.20 0.60-0.90 0.040 0.050 1020 0
E235+N 냉부착 튜브 정밀 장비용 탄소 강철 튜브
E235+N Seamless Cold Drawn Tube: Carbon Steel Seamless Tubes for Precision Equipment Material E235+N seamless cold drawn tubes are a type of carbon steel tube that undergoes a specific manufacturing process to ensure high precision and quality. The "E235" designation refers to the steel grade, while the "+N" indicates that the tubes are normalized, a heat treatment process that enhances their mechanical properties and dimensional accuracy. These tubes are widely used in
EN 10217-6 P265NL 압력 용으로 용접된 잠수된 아크 용접된 비연금 철강 파이프
EN 10217-6 P215NL P265NL Welded Steel Tubes: Submerged Arc Welded Non-Alloy Steel Tubes For Pressure Purposes Material and Specification EN 10217-6 is a European standard that specifies the technical delivery conditions for welded steel tubes for pressure purposes. Specifically, it covers submerged arc welded non-alloy steel tubes. The material grades covered by this standard are P215NL and P265NL. Key Features The key features of EN 10217-6 P215NL and P265NL welded steel
고효율 열교환기를 위한 L형 발의 합금강 나선형 핀 튜브
L-Foot Finned Tube (Alloy Steel Spiral-Wound) for Heat Exchangers Material This product is a finned heat-exchanger tube where an alloy steel base (core tube) is wound helically with a fin strip whose foot is shaped into an “L” profile, hence the term “L-foot fin”. The fins are under tension, tightly pressed onto the core tube surface, forming a continuous spiral fin around the outer circumference. Specifications Typical ranges and features: Core tube material: seamless alloy
