alloy steel seamless tube
"
설계를 위한 튼튼한 합금 강관 이음새가 없는 34CrMo4 42CrMo4 42CrMo
34CrMo4 42CrMo4 42CrMo Seamless Cold Drawn/Cold Rolled Alloy Steel Tube 34CrMo4: C: 0.30-0.37 Si: 0.40 Mn: 0.40-0.90 P: 0.035 S: 0.035 Cr: 0.90-1.20 Mo: 0.15-0.30 42CrMo4: C: 0.38-0.45 Si: 0.40 Mn: 0.60-0.90 P: 0.035 S: 0.035 Cr: 0.90-1.20 Mo: 0.15-0.30 42CrMo: C: 0.38-0.45 Si: 0.17-0.37 Mn: 0.50-0.80 Cr: 0.90-1.20 Mo: 0.15-0.25 CHEMICAL COMPOSITION(%) Steel Grade C% Mn% Si% S% P% V% Ni% Cr% Mo% Cu% CK45 0.42-0.50 0.50-0.80 0.17-0.37 ≤0.035 ≤0.035 / ≤0.25 ≤0.25 / ≤0.25
내산성 합금 강관 Incoloy 825 ASTM B423 ASTM B829 ASTM B705
Alloy Steel Pipe Incoloy seamless steel pipe 825 Chemical composition: Ni %:38-46 Cr %:19.5-23.5 Fe:Remained. C%:0.025 Mn%:1.0 Si%:0.5 Cu%:1.5-3.0 Mo%:2.5-3.5 Al%:0.2 Ti%:0.6-1.2 P%:0.02 S%:0.01 Characteristic: Good resistance to stress corrosion cracking. Good resistance to pitting and crevice corrosion. Good resistance to oxidatiom and non-oxidizing acidic heat energy. At room temperature and temperatures up to 550℃ have the good mechanical properties. Have certified
합금 강관 Hastelloy 용접된 C276 니켈 - 크롬 - 몸리브덴 8.9 g/cm3
Alloy Steel Pipe Hastelloy C-276 nickel-chromium-molybdenum alloy Welded steel pipe Hastelloy C-276 is a nickel-chromium-molybdenum alloy containing tungsten content of silicon, carbon is very low. Standard of Hastelloy C-276: ASTM B462,STM B564, ASTM B575 and so on Hastelloy C-276 is characterized by: ● In the oxidation and reduction status, for most corrosive medium has excellent corrosion resistance. ● excellent resistance to pitting, crevice corrosion and stress corrosion
니켈 - 기본적인 Superalloy 강관 Incoloy A - 286 7.94 G/Cm ³ 합금 강철 배관
Alloy Steel Pipe Incoloy A-286 Charactistic of material: Chemical composition: C: ≤0.08 Cr:13.5-16.0 Ni:24.0-27.0 Mo:1.00-1.50 Ti:1.75-2.30 Fe:remaind V:0.10-0.50 B:0.001-0.010 Mn:1.00-2.00 Al ≤0.04 Si:≤1.00 P:≤0.030 S:≤0.020 Fe-25Ni-15Cr base superalloy + molybdenum,titanium,aluminum,Vanadium Physical properties: Density 7.94 g/cm³ 0.287 lb/in³ Melting Point 1430°C 2600°F Coefficient of Expansion 16.4 μm/m °C (20 - 100°C) 9.1 x 10-6 in/in °F (70 - 212°F) Modulus of Rigidity
환경 합금 강관 합금 6B 코발트 - 근거한 PED 증명서를 착용하십시오
Wear Environment Alloy Steel Pipe Alloy 6B Cobalt - Based PED Certification Alloy Steel Pipe Alloy 6B cobalt-based alloy Alloy 6B is a cobalt-based alloy for wear environment, anti-seizure, anti-wear, anti-friction. It has a low coefficient of friction, which can make sliding contact and other metals and no wear in most cases. Even without lubricant, or cannot use lubricant applications, Alloy 6B minimizes scuffing and wear. Alloy 6 B wear-resisting performance is inherent,
엔진 분대를 위한 합금 41를 강하게 하는 최고 합금 강관 강수
Super Alloy Steel Pipe Precipitation Hardening Alloy 41 For Engine Components Alloy Steel Pipe Alloy 41 precipitation hardening Nickel-Base Superalloy Alloy41 is a precipitation hardening Nickel-Base Superalloy, and it has higher tensile and lasting creep strength and good oxidation resistance within the temperature range of 650~950℃. Since the alloy of aluminum, titanium, molybdenum content is high, the ingot blooming is more difficult, but the material after deformation has
철을 가진 항공기 엔진 Hastelloy X 합금 강관 니켈 기반 초합금
Alloy Steel Pipe HastelloyX Hastelloy X is a kind of nickel-based superalloy with high iron content, which is mainly solution strengthened by chromium and molybdenum solution strengthening. It has good resistance to oxidation and corrosion resistance. It has good cold & hot formability and weldability because its moderate lasting and creep strength under 900℃. Used in the manufacture of aircraft engine combustion chamber components and other high temperature components. It
15Mo3 열 교환기용 고장 없는 보일러 튜브
15Mo3 Seamless Boiler Tube Alloy Steel Seamless Pipe For Heat Exchangers Seamless boiler tubes made from 15Mo3 alloy steel are critical components in a range of industrial applications where high temperature and pressure are involved. These pipes are particularly valued for their durability, heat resistance, and excellent mechanical properties. Below is a comprehensive overview of 15Mo3 seamless boiler tubes, covering material specifications, key features, and their
ASTM A335 P91 합금 강철 꿰매지 않는 파이프
ASTM A335 P91 P1 P2 P5 P11 Alloy Steel Seamless Pipe: Chrome Moly Pipe for High-Temperature Service Material and Specification ASTM A335 is a specification for seamless ferritic alloy-steel pipe intended for high-temperature service. The grades covered under this specification include P1, P2, P5, P11, and P91, each designed to withstand elevated temperatures and pressures. These pipes are commonly used in power plants, petrochemical plants, and other high-temperature
