alloy steel tube
"
1026 4140 4130 합금 강철 기계적인 배관 무거운 벽 Astm A519
ASTM A519 1020 1045 Cold Drawn Seamless Heavy Wall Steel Tube Quick detail : Origin China Brand name Torich Certificate ISO9001 TS16949 Material Carbon steel 1020,1010,1045,4130,4140,38CrMoAl,20Cr etc Product name ASTM A519 1020 1045 Cold Drawn Seamless Heavy Wall Steel Tube Capacity Cold drawing,Cold rolled,Hot rolled,Cutting ,Charmfering,Polishing,Threading etc Basic introduction of Precision steel tubes for machining and cold-drawn profile tubes Production method: Cold
JIS G3466 STKR400 및 STKR490 등급의 표준 탄소 강철 제곱 철강 튜브 20 × 20 mm ~ 350 × 350 mm 차원
JIS G3466 Carbon Steel Square Steel Tube For General Structural Purposes Product Overview JIS G3466 carbon steel square steel tube is a cold-formed or formed structural hollow section used for general civil engineering, architectural, and fabricated steel structures. Under JIS G3466, the standard grade symbols are STKR400 and STKR490; STKR400 is selected for general structural frames, while STKR490 is used when higher yield and tensile strength are required. The tube is
EN 10025-2 S235JR 구조용 철강 파이프 가열 롤링 비 합금 구조용 철강 파이프
EN 10025-2 S235JR S235J0 S235J2 S275JR S275J0 Structural Steel Pipe Introduction EN 10025-2 is a European standard that specifies the technical delivery conditions for hot-rolled non-alloy structural steel products. This standard covers various grades of structural steel, including S235JR, S235J0, S235J2, S275JR, and S275J0, which are widely used in construction and engineering applications. Material Specification The structural steel grades specified in EN 10025-2 are
ASTM A249는 보일러/열교환기를 위한 오스테나이트계 스테인리스 관 1/4 용접했습니다
ASTM A249 Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat Exchanger, Condenser Tubes Size: OD: 1/8 in (3.2mm) to 5 in (127mm) WT: 0.015 to 0.320 in (0.4 to 8.1mm) Grade: TP304H, TP309H, TP310H, TP316H, TP312H, TP347H and TP348H. TP304, TP309S, TP310S, TP310Cb, TP316, TP321, TP347, TP348 For high-temperature service such as for superheaters and reheaters Application: Boiler, Superheater, Heat Exchanger, Condensor Tubes Austenitic stainless steel,
ASTM A249 보일러를 위한 오스테나이트계 밝은 단련된 스테인리스 관
ASTM A249 Standard Specification for Welded Austenitc Steel Boiler, Superheater, Heat Exhchanger, Condensor Tubes Size: OD: 1/8 in (3.2mm) to 5 in (127mm) WT: 0.015 to 0.320 in (0.4 to 8.1mm) Grade: TP304H, TP309H, TP310H, TP316H, TP312H, TP347H and TP348H. TP304, TP309S, TP310S, TP310Cb, TP316, TP321, TP347, TP348 For high-temperature service such as for superheaters and reheters Application: Boiler, Superheater, Heat Exhchanger, Condensor Tubes Austenitic stainless steel,
ASTM A178/A178M 탄소 망간은 보일러/과열기를 위한 강철 관을 용접했습니다
ASTM A178/ A178M Carbon Manganese Welded Steel Tube For Boiler / Superheater Applications: for Boilers,Superheaters, Heat-Exchangers, Condensers, Boiler flues, superheater flues and e ends Material: Carbon Steel and carbon manganese steel Production: Electric Resistance Welding Size range: O.D.:6-127mm W.T.:0.9-9.1mm L: according to customer requirement Steel Grade and Chemical Compositions: Element Grade A, Low-Carbon Steel Grade C, Medium-Carbon Steel Grade D, Carbon
Aisi 4130 강철 급료를 가진 냉각 압연 합금 이음새가 없는 강철 관 1 - 12m
Cold Drawn Alloy Seamless Steel Pipe with AISI 4130 Steel Grade ASTM A519 SEAMLESS STEEL TUBES, by DOM production, with the steel grade of SAE4140 and SAE4130, other alloy steel grade upon customer's agreement.: SAE4130: C: 0.28-0.33% Mn: 0.40-0.60% P max 0.40% S max 0.40% Si: 0.15-0.35% Cr: 0.80-1.10% Mo: 0.15-0.25% SAE4140: C: 0.38-0.43% Mn: 0.75-1.00% P max 0.40% S max 0.40% Si: 0.15-0.35% Cr: 0.80-1.10% Mo: 0.15-0.25% Annealed AISI4130 AISI4140 Cold Drawn Alloy Steel
열간압연 C45 둥근 막대기/S45C SAE1045 CK45 합금 강철 둥근 막대기
Hot Rolled C45 Round Bar S45C SAE1045 CK45 Steel Alloy Steel Round Bars Material and Grade AISI: D2, D3, D6, D7, A2, A6, A8, A10, H10, H11, H13, H21, S1, S5, S7, O1, O6; DIN: 1.2080, 1.2316, 1.2343, 1.2344, 1.2379, 1.2510, 1.2601, 1.2713, 1.2714, 1.2767, 1.2842; JIS: SKD1, SKD11, SKD61, DC53; GB: Cr12, Cr12MoV, Cr12Mo1V1, 6CrW2Si, 4Cr5MoSiV, 4Cr5MoSiV1, 3Cr2W8V. Material Grade Material Grade 8#-10# φ16-290 65Mn φ40-300 15# φ14-150 45Mn2 φ18-75 20# φ8-480 60Si2Mn φ16-150 35#
가공하는 알루미늄 특별한 합금 강철은 단면도 일반적인 기술설계를 위한 내밀었습니다
GB/T 6892 Wrought aluminium and aluminium alloys extruded profiles for general engineering Product Description 1.Reference Standard ASTM B241, ASTM B209-04, B210M-05, B234M-04, B221M-05a, AISI, SUS, EN573-3-2003, JISH4000-2006, H4080-2006 etc 2. Grade 6063 6061 6060 6005 6082 1070 1060 7010 3.Size Outer Diameter: max 200mm, Length: Max 7m 4. Tolerance Generally according to GB/6892, Special requirement ±0.05 5. Production method Hot Extrusion 6. Production process Aluminum
