cold formed steel tube
"
C10200 구리는 55 밀리미터 Od 로우 핀 관을 코팅했습니다
Copper Coated Seamless Steel Tube Low Finned Tube PRODUCT DESCRIPTION: Keyword: Copper Low Fin Tube Material: C10200, C11000 Etc Fin Thickness: 0.1mm - 2mm Tube OD: 8mm - 55mm Length: max 12m Application: For Boiler And Heat Exchanger End Protector: Plain End / Beveled End Surface: Copper Coated Test and Inspection: Tension Test, Flaring Test, Flange Test, Reverse Test, Hardness Test, Hydrostatic or Nondestructive Electric Test etc QUALITY CONTROL: Incoming Raw Material
냉각 압연 OD 609.6 밀리미터 ASTM A312 녹슬지 않는 용접관
ASTM A312 Seamless Welded and Heavily Cold Worked Austenitic Stainless Steel Pipes Product Description: The standard specifications include seamless, straight seam welded and heavily cold welded austenitic stainless steel tubing for high temperature and general corrosive service. There are several grades in this standard, and each steel grade shall confirm to the required chemical composition of C, Mn, P, S, Si, Cr and Cr, Ni, Mo, etc. All the pipes shall be furnished in the
ASTM A500 용접 그리고 구조상을 위한 이음새가 없는 탄소 직사각형 강관
ASTM A500 welding and seamless carbon steel rectangular pipe for structural This specification covers cold- formed welded and seam-less carbon steel round, square, rectangular, or special shapestructural tubing for welded, riveted, or bolted construction ofbridges and buildings, and for general structural purposes. This tubing is produced in both welded and seamlesssizes with aperiphery of 88 in. [2235 mm] or less, and aspecified wall thickness of 0.875 in. [22 mm] or less.
ASTM A714 Gr.1 건설공학용 고강성 저연금 무縫鋼 파이프
ASTM A714 Gr.1 Gr.2 Gr.3 Gr.4 Alloy Steel Pipe: High-Strength Low-Alloy Seamless Steel Pipe for Construction Engineering Introduction ASTM A714 is a specification that covers high-strength low-alloy seamless steel pipes intended for use in construction engineering. These pipes are designed to provide excellent mechanical properties and corrosion resistance, making them suitable for various applications in structural and industrial settings. Material The ASTM A714 specificatio
G Type Finned Tubes Embedded Fin Tube Stainless Steel Pipe with 1mm-40mm Thickness 6-630mm Outer Diameter 6-12m Length
G Type Finned Tubes — Embedded Fin Tube on Stainless Steel Pipe for Heat Exchangers Material G-type (embedded) finned tubes are stainless-steel base tubes with a helical groove machined on the outer wall. An aluminum, copper, carbon steel, or stainless steel fin strip is wound into the groove under tension, and the displaced base-metal is rolled back to mechanically lock the fin—forming a tight, gap-free metal-to-metal interface ideal for high vibration and cyclic thermal
정연한 특별한 강관 이음새가 없는 탄소 강철 구렁 단면도 관
TORICH Square Hollow Section Seamless Carbon Rectangle Square Steel Tube Standard: ASTM A500 Seamless Steel Rectangle Tubing Cold-Formed Welded Carbon Structural Tubing in Rounds and Shapes Rectagnle and Square steel square tube onesteel Applications: for construction of bridges, and buildings, and for general strcutrual purposes, For Algricultrual Michinery, Engineering etc. Size range: Square tubes O.D. :20-20 to 500-500mm W.T.:1-24mm L:max12000mm Rectangle tubes O.D. :20
특별한 니켈 합금 인콜로이 600 601 UNS N06600 튜브 불순물 카필러 튜브
Special nickel alloy incoloy 600 601 UNS N06600 tube alloy capillar tube Applications: For fluid and gas transport Technique: Cold Drawn Alloy or not: Alloy Secondary or not: Non-Secondary Steel Grade/Steel Material: Inconel 601 Size range: O.D. 3.18-101.6mm W.T. 0.5-20mm Length max 12000mm Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth Roughness TORICH QUALITY ASSURANCE Form ASTM Rod, bar and wire B 166 Plate, sheet and strip
높은 열전달 계수 압출 Od10mm 열교환 기 튜브
High Heat Transfer Coefficient Extruded Finned Tube And Fin Radiator Heat Exchanger Tubes The finned tube adopts the form of base tube covering aluminum tube, (the base tube can be carbon steel, stainless steel, copper) through machine extrusion to form the fin, the base of the fin is close to the outer wall of the tube, with high heat transfer coefficient and excellent heat transfer performance. Details: Maximum Working Temperature 545 Fin Materials Aluminium Base Tube
탄소강 유형 Kl Wt 10mm 압출 핀 튜브
Extruded finned tube Fin Tube Strip Air Heater Gilled Tube Radiator Gilled Tube Fin Tube Divaice Fin Tube Connector Puller The finned tube adopts the form of base tube covering aluminum tube, (the base tube can be carbon steel, stainless steel, copper) through machine extrusion to form the fin, the base of the fin is close to the outer wall of the tube, with high heat transfer coefficient and excellent heat transfer performance. Maximum Working Temperature : 545 Fin Materials
