nickel alloy pipe
"
ANSI 1200NB 소켓 용접 배관 플랜지는 표면 처리를 기름을 쳤습니다
ANSI/ASME B16.5 Socket Welding Flange Socket weld flange is similar to the slip-on flange in outline, but the bore is counter-bored to accept pipe. Socket welding pipe flanges are typically used on smaller sizes of high pressure pipes. Socket weld flanges are widely used in high pressure systems such as hydraulic equipment and steam lines. Socket weld pipe flanges are attached by inserting the pipe into the socket end and then applying fillet weld around the hub of the flange
ASTM A688 304 열 교환기를 위한 가접된 아우스테니틱 스테인리스 스틸 파이프
ASTM A688 304 316 304L 316L XM-29 Welded Austenitic Stainless Steel Pipe for Feedwater Heater Heat Exchanger Material, Specification, Key Features ASTM A688 is a standard that outlines the requirements for welded austenitic stainless steel pipes used in feedwater heater heat exchangers. These pipes are available in various grades, including 304, 316, 304L, 316L, and XM-29. Each grade offers specific properties suitable for different applications. The key features of these
니켈 인코넬 600
Nickel Inconel 600 Inconel 600 is a nickel-chromium alloy known for its oxidation resistance at high temperatures and good resistance in carburizing and chloride containing environments. It is normally used for applications which require resistance to corrosion and heat. It also has high strength and good workability. This material is extensively used in the chemical industry due to its strength and corrosion resistance. This grade is commonly found in nuclear reactors, steam
에틸렌 디클로라이드 (EDC) 크래킹 튜브용 인코넬 600 강철 파이프
Inconel 600 steel pipe for ethylene dichloride ( EDC ) cracking tubes Applications: For industry heating elements,home appliances Technique: Cold Drawn Alloy or not: Alloy Secondary or not: Non-Secondary Steel Grade/Steel Material: inconel 600 Size range: O.D. 1-600mm W.T. 1.0-18mm Length max 12000mm Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth Roughness TORICH QUALITY ASSURANCE Chemical Composition: Item Chemical Compositio
오일 된 듀플렉스 2205 스테인리스 스틸 파이프
DUPLEX 2205 STAINLESS STEEL PIPE Duplex 2205 stainless steel pipe combination of ferrite and austenite is the most beneficial properties, has the very good resistance to chloride stress corrosion cracking, is made up of 21% chromium, 2.5% nitrogen and 4.5% molybdenum nickel alloy consisting of duplex stainless steel, it is the yield strength of austenitic stainless steel double, this feature enables designers when designing products lose weight, make this kind of alloy has
니켈 - 기본적인 Superalloy 강관 Incoloy A - 286 7.94 G/Cm ³ 합금 강철 배관
Alloy Steel Pipe Incoloy A-286 Charactistic of material: Chemical composition: C: ≤0.08 Cr:13.5-16.0 Ni:24.0-27.0 Mo:1.00-1.50 Ti:1.75-2.30 Fe:remaind V:0.10-0.50 B:0.001-0.010 Mn:1.00-2.00 Al ≤0.04 Si:≤1.00 P:≤0.030 S:≤0.020 Fe-25Ni-15Cr base superalloy + molybdenum,titanium,aluminum,Vanadium Physical properties: Density 7.94 g/cm³ 0.287 lb/in³ Melting Point 1430°C 2600°F Coefficient of Expansion 16.4 μm/m °C (20 - 100°C) 9.1 x 10-6 in/in °F (70 - 212°F) Modulus of Rigidity
비 EN10219-2 - 합금/형성된 미립자 강철 감기는 구조상 빈 단면도를 용접했습니다
EN10219-1 EN10219-2 Cold Formed Welded Structural Hollow Sections of Non-Alloy and Fine Grain Steels Part 1: Technical delivery condition Part 2: Tolerances, Dimensions and Sectional Properties Structural hollow section manufacturing process: Structural hollow sections are manufactured by electric welding or submerged arc welding without subsequent heat treatment. Hollow sections manufactured by a continuous process shall not incude the welds used to join the lengths of strip
OD76.2mm ASTM B163 모넬 400 파이프
Alloy Monel 400 Nickel Alloy pipe Quick detail: Similar material grade :UNS:N04400 , DIN: NiCu30Fe W-Nr: 2.4360 GB/T: MCu-28-1.5-1.8 BS: NA 12:Ni68Cu28Fe Size: Tubes:OD: 1/2“ -3” 12.0-76.2mm WT:0.02”-0.5” 0.5-12.0mm Length: Ft 105ft 32 32mt Pipe: NPS1/2”+-6” 21.34-168.3mm WT:Sch10-Sch80 WT:2.11-12.7mm Length 45ft 14mt Heat exchanger tubes regular size: Φ19mmx2mm,Φ25mmx2.5mm和Φ38mmx2.5mm Φ25mmx2mm and Φ38mmx2.5mm Using small diameter tubes can increase heat transfer area per
부식 저항 합금 인콜로이 800 825 인코넬 600 718 튜브 / 바
Corrosion Resistant Alloy Incoloy 800 825 Inconel 600 718 Tube / Bar Incoloy 800HT has excellent resistance in chemicals containing sulfuric acid, and has good resistance to environments containing chlorides, phosphoric acid and nitric acid. It contains niobium for stabilization against sensitization and resultant intergranular corrosion. It also has good mechanical properties and fabricability. Size Range Shape Size(mm) Wire 0.5-7.5 Rod/bar 8.0-200 strip (0.05-2.5)*(5-180)
