precision seamless pipe
"
이음새가 없는 탄소강 Astm A192 보일러관
ASTM A192 Seamless Carbon Steel Boiler Tubes For High-pressure Service Applications: For Boilers,Superheaters,Steam linepipes of boilers Technique: Cold-drawn Steel Grade/Steel Material: SA-450/SA-450M Size range: O.D. 6-168mm W.T. 1-15mm Length max 12000mm Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth Roughness TORICH QUALITY ASSURANCE Chemical Composition: C 0.06-0.18 Mn 0.27-0.63 P ≤0.035 S ≤0.035 Si ≤0.25 Mechanical
이음새가 없는 ASTM A269와 일반 근무를 위한 용접된 오스테나이트 상 스테인레스 스틸 튜빙
ASTM A269 Seamless and Welded Austentic Stainless Steel Tubing for General Service Applications: For auto industry/ machinery use/ decorations Technique: Cold-drawn Alloy or not: Alloy Secondary or not: Non-Secondary Steel Grade/Steel Material:TP201, TP304/304L, TP316/316L Size range: O.D. 4-355mm W.T. 1-50mm Length max 12000mm Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth Roughness TORICH QUALITY ASSURANCE Chemical
녹슬지 않는 철-니켈 인코넬 600 625 690 합금 강 인발관 배관
Stainless steel Nickel Inconel 600 625 690 Alloy Steel Seamless tube tubing Applications: For industry use Technique: Cold Drawn Alloy or not: Alloy Secondary or not: Non-Secondary Steel Grade/Steel Material: inconel 690 625 600 Size range: O.D. 6-219mm W.T. 1.0-12.7mm Length max 12000mm Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth Roughness TORICH QUALITY ASSURANCE Chemical Composition: Grade C Si Mn P Cu Cr Ni Fe Al
OD21.7mm 304L 316L 이중 통신 2205 정확성 스틸 튜브
Torich 304 304L 316L Duplex 2205 2507 Welded Stainless Steel Tube Pipe Type: Stainless, Grade: TP304,TP304L, TP316,TP316L, TP321 1.4301 Technical: welded Usage: Petroleum&Chemical industry Size: OD: 6.25-254mm WT: 0.5-12mm QUALITY CONTROL: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing and Cold Rolling, on line inspection 5. Heat Treatment, +A, +SRA, +LC, +N, Q+T 6.
자동차 시스템을 위한 DIN2391 St52 직류 전기로 자극된 정밀 스틸 튜브
DIN2391 St52 Galvanized Precision Steel Tube for Automotive System Material:E215 E235 E355 ST35,ST37.4,ST45,ST52.4 etc Size: OD:4-76mm, Wall thickness:0.5-8mm Surface:NBK, Galvanization/Galvanized/Zinc Coated, Blue White Zinc (Trivalent Chromium Passivation), Plating Colour Zinc(Trivalent Chromium Passivation), Yellow, Army-Green, Phosphated/Black Phosphated Surface quality:Without oxidization, No crack, No fold, No rolling fold, No scar, No laminar defect Tolerance Name
GB/T 28413 SA178 보일러 열 교환기용 고 주파수 용접 탄소 강철 파이프
GB/T 28413 SA178 High Frequency Welded Carbon Steel Pipes For Boiler Heat Exchangers Introduction GB/T 28413 SA178 is a standard specification for high-frequency welded carbon steel pipes commonly used in boiler heat exchangers. This article provides an overview of the material, specification, key features, chemical composition, mechanical properties, steel grades, applications, and possible alternative grades for SA178 pipes. Material The material used for GB/T 28413 SA178
GB/T 32970 높은 온도에서 고압 서비스를 위한 길쭉한 잠수된 아크 용접 철강 파이프
GB/T 32970 Longitudinal Submerged-Arc Welded Steel Pipe For High Pressure Service At High Temperatures Material The material used in GB/T 32970 longitudinal submerged-arc welded steel pipes for high pressure service at high temperatures is carbon steel. Specification The specification of GB/T 32970 includes the following parameters: Outer diameter range: 219-2820mm Wall thickness range: 6-30mm Length: 6-12 meters Pipe end: Bevel end, plain end, or threaded end Key Features GB
ASTM A423 COR-TEN 직접 전기 용접 철강 파이프 기계용 고정 길이
ASTM A423 COR-TEN Straight Seam Electric Welded Steel Pipe Fixed Length Tube For Machinery Manufacturing Introduction The ASTM A423 COR-TEN straight seam electric welded steel pipe fixed length tube is a specialized steel product widely used in machinery manufacturing. This article will explore the material, specification, key features, chemical composition, mechanical properties, steel grade, applications, and possible alternative grades of this product. Material and
ASTM A381 고강도 낮은 합금 강철 파이프 고압 전송 시스템
ASTM A381 High-Strength Low-Alloy Steel Pipe for Use With High-Pressure Transmission Systems Introduction ASTM A381 is a specification that covers high-strength low-alloy steel pipe used in high-pressure transmission systems. This standard provides guidelines for the material, specification, chemical composition, mechanical properties, and application of these pipes. In this article, we will delve into the details of ASTM A381, exploring its material composition, mechanical
