seamless carbon steel tube
"
DIN 17174 St35 원형 철강 파이프 낮은 온도 서비스를위한 매듭없는 정밀 철강 파이프
DIN 17174 TTSt35N TTSt35V 11MnNi53 13MnNi63: Circular Steel Pipe Seamless Precision Steel Tubes for Low Temperature Service Material Specification DIN 17174 is a standard that specifies the requirements for seamless precision steel tubes used in low-temperature applications. These tubes are designed to withstand extreme cold environments, making them ideal for industries such as oil and gas, chemical processing, and cryogenics. The materials covered under this standard
저온강을 위한 이음새가 없는 용접된 JIS G3460 탄소 스틸 튜브
JIS G3460 Seamless and welded carbon steel tube for low temperature service JIS G3460 Carbon Steel Pipes for Low-temperature Piping specifies the steel pipes used for piping at exceptionally low temperatures of freezing point or under. Applications: For low temperature service Technique: ERW, Cold-finished, Hot-finished Alloy or not: Non-Alloy Secondary or not: Non-Secondary Steel Grade/Steel Material: STPL380 STPL450 STPL690 Size: OD 5-420mm WT 0.5-50mm Length 12000mm max
저온 서비스를 위한 냉각 압연 이음새가 없는 탄소 강관 JIS G3460
Cold Drawn Seamless Carbon Steel Pipes JIS G3460 For Low Temperature Service Material and Specification The Cold Drawn Seamless Carbon Steel Pipes discussed in this article conform to the Japanese Industrial Standard (JIS) G3460. These pipes are specifically designed to be used for low-temperature services, making them suitable for various applications in industries where operating temperatures are relatively low. Chemical Composition Element Chemical Composition (%) Carbon
GB/T 31928 스테인리스 스틸 튜브
GB/T 31928 Stainless Steel Tube: Seamless Stainless Steel Tubes And Pipes For Ship Introduction The GB/T 31928 standard specifies the requirements for seamless stainless steel tubes and pipes used in shipbuilding applications. These tubes and pipes are designed to withstand the demanding conditions found in marine environments, providing superior corrosion resistance, strength, and durability. This article highlights the material, specifications, key features, chemical
보일러와 열교환기를 위한 JIS G3461 탄소 스틸 튜브
JIS G3461 Carbon Steel Tubes for Boiler and Heat Exchanger Scope:JIS G3461 Carbon Steel Tubes is mainly used for exchanging heat on the inside and outside of the tube, such as water tubes, smoke tubes, superheater tubes, air preheater tubes, etc.Its application fields are: boiler tubes, heat exchanger tubes, condenser tubes, catalyzer tubes, etc. It can also be used in chemical and petroleum industries, But it can't be used for low temperature service. Chemical Composition:
완전히 단련된 보통 냉각 압연 이음새가 없는 강철 관 스테인리스 304/304L
Cold Drawn Seamless Stainless Steel Tubes Fully Annealed Plain Production describe Steel Grade/Steel Material:304/304L,316/316L,314,321,347H Steel pipe standard:ASTM213 ASTM199 Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth Roughness TORICH QUALITY ASSURANCE Production Processs: RAW MATERIAL ↓ INCOMING INSPECTION ↓ STORAGE → CUTTING→HAMMERING → PICKING LUBRICATION → CLEANING → PHOSPHORI CLEAN ↓ ENDS CUTTING←STRAIGHTENING←HEAT
ASTM A192 고압 보일러를 위한 이음새가 없는 탄소 강철 보일러관
ASTM A192 Seamless Carbon Steel Boiler Tubes for High Pressure Boilers Material: Carbon Steel Production: Tubes are manufactured by seamless process and both hot finished and cold finished are applicable. Size range: O.D.: 12.7-177.8mm W.T.: 1-25.4mm L: according to customer requirement Applications: for Boilers,Superheaters, Heat-Exchangers, High-pressure Boilers, Steam Boilers Cold Condensers and High-Pressure Services, High-Temperature Services for Boiler Constructions
EN 10305-3 28Mn6 용접 냉간 성형 탄소강 튜브 (정밀 적용 분야용, 외경 30 - 426 mm)
EN 10305-3 / 28Mn6 Welded Cold-Sized Carbon Steel Tube for Precision Applications Material Overview EN 10305-3 (Welded Cold-Sized Tubes) defines the technical delivery conditions for welding cold-sized steel tubes used in precision applications.“28Mn6” (steel number 1.1170) is a heat-treatable, manganese-containing carbon steel grade commonly used in mechanical and automotive applications. When used in welded cold-sized tubes under EN 10305-3, 28Mn6 provides a balance of
탄소 강철 ERW 정사각형 파이프 직사각형 철강 튜브
ERW Square Pipe Seamless Rectangle Steel Tube Standard: ASTM 500 Material: Q195/Q235/Q345/16Mn/ASTM A53/ST37/ST52 Appilications: for construction of bridges, and buildings, and for general structural purposes Size range: Square tubes: O.D.: 5 - 420mm W.T.: 0.5 - 50mm L: Max 12000mm Rectangle tubes: O.D.: 20 - 30 to 400-600 W.T.: 1 - 24 mm L: Max 12000mm ASTM A500 Steel Grade and Chemical Compositions: Element Grade A, B and D Grade C Heat Analysis Product Analysis Heat
