cold drawn tubes
"
ASTM A513 하이드로릭 실린더용 5형 DOM 탄소강 튜브
ASTM A513 Type 5 Drawn-Over-Mandrel (DOM) Carbon Steel Mechanical Tubing 1. Material Overview ASTM A513 Type 5 designates electric-resistance-welded (ERW) carbon steel tubing that undergoes a Drawn-Over-Mandrel (DOM) process. This cold-drawing ensures close control of dimensions—tight outside/inside diameter and wall thickness tolerances—uniform concentricity, dense surfaces, and predictable mechanical strength. It’s widely used for precision mechanical parts including
E155 E195 EN10305-2 완충 장치 용접 스틸 강관
TORICH Welded Precision Steel Tube EN10305-2 E235 E355 Quick Detail: Product name Welded Precision Steel Tube EN10305-2 E235 E355 Steel Grade E155, E195, E235, E275, E355 Size Range OD range:15-200mm WT range: 0.8-16mm Tolerance OD: (+/-0.06mm) WT: (+/-0.03mm) ID surface 0.4μm Straightness ≤0.5mm/1m Roundness ≤0.5mm Regular specifications 23.2X1.6, 42X3, 25.4X0.9, 15x1, 19x1.5, 20x1, 20x1.5 Delivery Condition +C, +LC, +SC, +A, +N Standard DIN 2393, ASTM-A513-t6, EN10305, ASTM
농업용 구동용 탄소강 삼각 PTO 샤프트 튜브
Triangle PTO Shaft Tube – Carbon Steel Special-Shaped Pipe for Agricultural Drive Shaft Material This is a special‑shaped (triangular or “lemon”) seamless carbon steel tube, specifically designed for use as a PTO (Power Take‑Off) shaft tube in agricultural drive systems. Materials include carbon steel grades such as ST52, E235, E355 (according to EN 10305‑1), as well as SAE grades 1010, 1020, 1040, Q345B, and Q355B. These are cold‑drawn and optionally cold‑finished,
롤 케이지용 DOM 스틸 튜브 ASTM DIN GB JIS API 인증
Round DOM Roll Cage Tubing Structural Steel Pipe DOM Tubing For Roll Cage 【Material】 Drawn Over Mandrel (DOM) tubing is produced by electric resistance welding of carbon-steel strip followed by cold drawing over a mandrel to remove weld flash and enhance mechanical properties. This process yields: Uniform wall thickness and concentric OD/ID. Improved yield and tensile strength compared to standard ERW tubes. Smooth OD/ID surfaces, requiring minimal machining. 【Specifications】
모터 하우징용 경량 부식 방지 박벽 스테인리스강 이음매 없는 튜브
Thin-Walled Seamless Stainless Steel Tube for Motor Housing Material Overview A thin-walled seamless stainless steel tube is a precision-manufactured hollow stainless component with a very small wall thickness relative to its diameter. The seamless process removes weld seams, ensuring uniform properties, improved reliability, and excellent performance in high-precision applications such as electric motor housings. Specifications Outer Diameter (OD): approx. 1.0 mm up to 100
의료용 스테인리스 스틸 염기관 튜브
Stainless Steel Capillary Tube — Small-Diameter Medical-Grade Stainless Steel Pipe Material This product is a stainless steel capillary tube (also called a micro or small-diameter stainless steel pipe), engineered for medical and precision fluidic systems. It provides a hollow cylindrical conduit with very small internal diameters (ID) and tight dimensional tolerances, suitable for transporting small volumes of fluid or gas under controlled conditions. The tubes are often
자동차용 구리 튜브, 쌍벽, 저탄소 강철 튜브 구리 접착
Bundy Tube – Double-Wall Copper-Plated Low-Carbon Steel Tube for Automotive Use Material Overview Bundy tube is a double-wall low-carbon steel tube manufactured by rolling a steel strip into a 720° overlap and copper-brazing the seam. This produces a concentric double-wall tube with a continuous brazed bond between the two walls. For automotive brake and fuel lines, this design offers: The mechanical strength and rigidity of steel The corrosion protection and brazeability of
100Cr6 베어링 튜브 기계 부품용 작은 지름의 냉장 정밀 무선 튜브
Bearing Tube: Small-Diameter Cold-Rolled Precision Seamless Tube for Mechanical Components Material Overview This product is a small-diameter, cold-rolled (or cold-drawn) precision seamless steel tube designed for high-demand mechanical parts—especially where fatigue resistance, wear resistance, dimensional stability, and consistent microstructure are critical. It is typically produced in two material families: Through-hardening bearing steels (100Cr6, 100CrMn6): high-carbon
정밀 기계용 DOM 탄소강 튜브 30-425mm OD
Dom Round Tubing Welded Carbon Round Steel Tube for Precision Machinery Material Overview Dom Round Tubing—commonly referred to as DOM (Drawn Over Mandrel)—is produced from electric-resistance-welded (ERW) steel (typically AISI 1020, 1026, or equivalent). It undergoes cold drawing over a mandrel to remove weld flash, enhancing dimensional accuracy, concentricity, strength, and surface quality. It is widely used in precision machinery due to these enhanced characteristics.
