thick wall steel pipe
"
ASTM B75 C12200 증기 추적 용 용품용 냉면 무선 구리 합금 튜브
ASTM B75 C12200 Copper Alloy Tube High-Quality Copper Alloy Tubes For Steam Tracing Material Description ASTM B75 C12200 copper alloy tube is a seamless, cold-drawn phosphorus-deoxidized copper (Cu-DHP) tube designed for general engineering service and particularly well suited for steam tracing and low- to medium-temperature steam lines. The alloy (UNS C12200 / Cu-DHP) combines: Very high copper purity (≥99.9% Cu including Ag) with 0.015–0.040% phosphorus as a deoxidizer,
구리 코팅된 이음새가 없는 8 밀리미터 Od 낮은 핀형 관
Copper Coated Seamless Low Finned Tube PRODUCT DESCRIPTION: Keyword: Copper Low Fin Tube Material: C10200, C11000 Etc Fin Thickness: 0.1mm - 2mm Tube OD: 8mm - 55mm Length: max 12m Application: For Boiler And Heat Exchanger End Protector: Plain End / Beveled End Surface: Copper Coated Test and Inspection: Tension Test, Flaring Test, Flange Test, Reverse Test, Hardness Test, Hydrostatic or Nondestructive Electric Test etc QUALITY CONTROL: Incoming Raw Material Inspection Raw
G-Type Embedded Fin Tube with High Thermal Efficiency and Corrosion Resistance for Heat Exchangers
Embedded Fin Tube – Carbon Steel “G-Type” Finned Pipe for Heat Exchangers Material The product is a G-type embedded finned tube , consisting of a carbon steel base tube and mechanically embedded helical fins. The fins can be made from aluminum, copper, stainless steel, or carbon steel , depending on service temperature, corrosion conditions, and thermal conductivity requirements. The embedded structure ensures excellent fin-to-tube bonding and enhanced heat transfer
4130 4140 30CrMo4 42CrMo4 크롬 몰리 합금 튜브
4130 4140 30CrMo4 42CrMo4 Precision Chrome Moly Alloy Tube Chemical Composition: Standard Steel Grade C(%) Si(%) Mn(%) S(%) P(%) A519 1010 0.05-0.15 0.15-0.35 0.3-0.6 ≤0.050 ≤0.040 1020 0.15-0.25 0.15-0.35 0.3-0.6 ≤0.050 ≤0.040 1045 0.43-0.50 0.15-0.35 0.6-0.9 ≤0.050 ≤0.040 4130 0.28-0.33 0.15-0.35 0.4-0.6 ≤0.040 ≤0.040 4135 0.32-0.39 0.15-0.35 0.6-0.9 ≤0.040 ≤0.040 4140 0.38-0.42 0.15-0.35 0.7-1.0 ≤0.040 ≤0.040 Other Specification: End Shape Beveled end, plain end, vanished,
TORICH BKS 완충 장치 유압 실린더 관 ST52 E355 물질
TORICH ST52 E355 BKS Shock Absorber Using CK45 AISI1020 AISI1045 CDS Honed Tube ST52 E355 BKS Shock Absorber Using CK45 AISI1020 AISI1045 CDS Honed Tube Delivery condition: The tubes can be produced in the following delivery conditions: BK (+C) Cold finished/hard (cold finished as drawn). No heat treatment after the last cold forming process. BKW (+LC) Cold finished/soft (lightly cold worked) After the last heat treatment there is a light finishing pass (cold drawing). BKS (
Continuously Welded Helical Finned Tube with 30-325 mm Outer Diameter and 6M or Custom Length for Boiler Economizers
Helical Finned Tube — Continuously Welded Spiral ND Steel Fin Tube for Boiler Economizers Material A high-frequency resistance welded helical/spiral finned tube produced with an ND steel (09CrCuSb) base tube and optional ND/carbon/stainless fin strip. ND steel is a Cu–Sb–Cr–alloyed low-alloy steel engineered to resist low-temperature sulfuric-acid dew-point corrosion and chloride attack in flue-gas paths, making it ideal for boiler economizers and air preheaters. Specificatio
고 정밀도 DIN 2391 24 밀리미터 냉각 압연 인발관
24mm high precision seamless steel small tube Torich the steel tubes maker. Key words :Hydraulic cyliner tubes,DIN2391 steel tubes ST37 ST35 St37.4 St52 E235 E255 E355 etc material is avaliable. Delivery condition:BK(+C),BKS(+SR),BKW(+LC),GBK(+A),NBK(+N). Spec: OD4-114.3mm WT0.5-15mm Pls feel free contact if any special requests on material and sizes. Production method:Quality carbon steel--Cold drawing--Bright heat treatment without oxidization (NBK status)--nondestructive
ASME B16.9 10 " 버트 접합 집중적 환원제 이음새가 없는 DN6 DN100
ASME B16.9 Concentric Reducer Standard ASME B16.9 wraps in several parameters that act as a guideline for the manufacturer of wrought factory-made buttwelding fittings such as elbows, tees, reducers including the Carbon Steel Concentric Reducer etc. The fittings need to conform to the values of the following parameters i.e. overall concentric pipe reducer dimensions, ratings, testing, tolerances, and markings. Depending on the buyer, these reducers are made available between
겹쳐진 L형 핀 튜브 탄소 LL형 핀 튜브
Overlapped L Type Fin Tube Carbon LL Type Finned Tube for Heat Exchanger Product Overview Overlapped L type fin tube, also called LL type finned tube or LL-foot fin tube, is a tension-wound finned tube where L-shaped fins are helically wrapped around a carbon steel base tube and each fin foot overlaps the previous one. This creates a double “L” foot that completely jackets the outer surface of the tube. For carbon LL type fin tubes, the base tube is typically seamless low- or
